… Mechanical properties listed below reflect utilization of a post-weld heat treatment between …

… can be used on a variety of austenitic and ferritic steels and nickel alloys. … Mat No :1.4859, 1.4861, 1.4876, 1.4877, 1.4885, 1.4958, … G-X10NiCrNiNb 32 20, NiCr20Ti ,NiCr20TiAl,X8Ni9, X7NiMo6, 12Ni19 ASTM: Alloy 600/B168, Alloy 800/800H, Alloy 75, Alloy 80A   … E NiCro A … A 5.11: E NiCrFe-2 …

… • High quality alloyed copper wire for the Tig process (Mig brazing as well) • The … plates in the car industry and also for cladding CuMn, CuSiMn and CuZn alloys. Suitable for cladding cast iron and un- and low alloyed steels. … CuSi3 Tig … A 5.7: ERCuSi-A … 24373: Cu 6560 / …

… high integrity structural service at elevated temperature so the minor alloy additions responsible for its creep strength are kept above the …

… Powder HVOF DUR 12 (45/15) could be considered an intermediate alloy between Powder HVOF DUR 6 (45/15) and Powder HVOF DUR 1 (45/15). …

… Cr and Mo-alloyed basic elektrode for welding creep resistant steels and steel …

… low friction, Excellent against erosion, corrosion and galling. The alloy is high temperature resistant up to 1000°C and can resist severe …

… particularly to corrosion in acid and chlorinated environments. The alloy has a low carbon content which makes it particularly recommended …

… The alloy has a high wear resistance against metal to metal wear in hot …

… high integrity structural service at elevated temperature so the minor alloy additions responsible for its creep strength are kept above the …