… for high quality tank and apparatus construction in the chemical industry. Flux Fl 860 ESHC … SA Alloy 825 is specially designed for …

… 2400 HV nickel based corrosion resistant hardfacing alloy containing 60% tunsten carbides. OA WC2 (Ni)  has … Also for augers, impellers, mixer plates in the brick and clay industry and on decanter screws or hardfacing deep drilling equipment. … OA WC2 Ni … 14700: T Ni20 …

… penetration this alloy is used mainly in construction and automotive industry. The silicon addition results in improved fluidity (wetting …

… steels in applications such as vessels, pipes and in the offshore industry with a minimum yield strength of 470 Mpa. The wire provides …

… Powder HVOF DUR 1 is a hardfacing alloy possessing excellent abrasion and corrosion resistance …

… down to -50°C and is especially suitable for use in the offshore industry such as riser pipes that often are heat treated after weding.. …

… Excellent corrosion resistance as needed in chemical industry up to 400 °C and exceptional weldability with no spatter and …

… CrNiMo steels.Excellent corrosion resistance as needed in chemical industry up to 400°C and good weldability with excellent flowing …

… of ships, off-shore, storage tanks, railways and automotive industry. … Aluminium alloys: AlMg4,5Mn, AlZnMgCu1,5, AlMg5, AlMg3, …

… CEWELD E DUR 55 is a heavy coated high efficiency Hardfacing electrode with 160 % recovery. Suitable for applications subject to strong abrasive wear by minerals … 54-62 HRc, Hardfacing loaders, buckets, pumps, cement crushing equipment, screws, mixers blades etc., excellent …