… Without slag. Extremely crack resistant. Suitable for economic welding of CrMoV-steels up to 550 °C. Due to the seamless production …

… present in alloy C22; it is therefore considered suitable for welding this group of alloys. Alloy 59 consumables also provide strong, …

… NILO Alloy 36 is used for welding NILO Alloy 36, NILO Alloy 36 is formulated to have low thermal …

… Attractive bead appearance without slag residues. Best to be used with welding flux FL 915 … 1.4317, 1.4313, 1.4407, 1.4414,    GX4CrNi13-4, …

… For welding heat-resistant austenitic steels of the 25% Cr, 20% Ni types. …

… manganese steels. Very good weld deposit appearance and outstanding welding properties on both AC and DC+. Preheating is not required. … …

… Extreme easy to weld with excellent welding properties and increased yield strenght. High world wide …

… Special alloy for welding aluminium-magnesium basis alloys with maximum 5% Mg. Zirconium …

… FL CS165 is a fused flux for SAW welding un and low alloyed carbon steels. Basicity: about 1,3 …

… Mn, Ni, Cr and Mo alloyed basic electrode for welding low alloyed steels with tensile strength > 620 MPa. Crack …