… deposits are air-hardenable that can normally be heat-treated after welding. … 1.4000, 1.4001, 1.4002, 1.4003, 1.4006, 1.4008,  1.4021, …

… E Alloy Hx is a High temperature-resistant solid-solution-strengthened alloy with higher mechanical properties and good … up to 1095°C. … Hastelloy X, and similar NiCrMo alloys, dissimilar welding of Nickel alloys, stainless steel, carbon steel and low alloyed …

… on wire diameter) tungsten carbides. OA WC2-Fe  has good welding characteristics. Multi-layer deposits are not recommended due …

… CEWELD® FL 400 is an agglomerated flux for SAW welding to obtain increased hardness with low and un-alloyed sub arc …

… temperature should be between 100°C (212 °F) and 150°C (302 °F) . As welding flux FL 155 should be used because of its high basicity and low …

… and improved coating against moisture pick up. (after anodizing the welding will appear as a dark grey color) … AlSi alloys with max. 7% …

… Mo content, with low carbon content (less than 0.05%), to be used for welding creep resistant steels. … For 2.5%Cr-1%Mo-alloyed, …

… excellent wetting. Due to the excellent wetting and low melting point welding speeds can be achieved upto 2 mtr/min. The weld deposit offers …

… offer low hydrogen content and excellent weldability in multi layer welding and narrow gab. … S550QL1, fine grain steels, X70, X80, AISI …

… Excellent weldabillity in combination with FL 860 ESHC with high welding speed and deposition rate. The weld seam shows a fine rippled …