… feather. The deposit is not mashinable or forgeable. Only grinding with diamond tools is possible.Dur R (Ni) is available as a 500 mm … cast iron or Mn-steel. The main applications are hardfacing and rebuilding of stabilisers and other oilfield tools where maximum protection …

… Extreme easy to weld with excellent welding properties and low fume, extreme subzero impact properties due to the TIG process. … Reh ≤ 420 MPa (67 ksi) ISO 15608: 1.2, 1.3, 2.1 1.5637, 1.6217, 1.6228, 1.0044-1.09821.0035 - …

… The Ceweld AA 904L is used for welding materials of similar chemical composition which are used for …

… Extreme easy to weld with excellent welding properties. High world wide excepted quality with ultra clean weld …

… and oxidation resistance above 1150 °C ( 2100 °F), especially when welding on base metals of nickel-iron-chromium alloys. High mechanical …

… hot cracking resistance and mechanical properties. To be used with welding flux FL 8111 or FL 838 … 1.4507, 1.4410, 1.4468, 1.4515, 1.4517, …

… bars, wooden bars etc. The CEWELD MA HSS is only machinable by grinding. … 57-62 HRc hardfacing alloy for steel cutting knives, scissors, …

… production.  Thicker sections should be preheated (150°C) prior to welding. … Filler metal for welding Aluminium alloys with maximum 4% Nickel … Al 4Ni0,2Ti Tig …

… 400”. It has good strength and resists corrosion in many media, including sea water, salts and reducing acids. The weld metal is not age … NiCu30Al, Monel alloy 400, R405, alloy K500 and dissimilar welding between these alloys. … NiCu30Mn Tig … A 5.14: ERNiCu-7 … 18274: S …

… For welding heat-resistant austenitic steels of the 25% Cr, 20% Ni types. …