… at sustained elevated temperatures. Non-heat treatable. Thicker sections should be preheated (150°C) prior to welding. … G-AlSi10Mg, …

… MPa yield strength (such as S460), approved according to grade 5Y46 at Lloyds and DNV. Excellent welding properties and extreme low hydrogen …

… resistance even in seawater. Welding instructions: - Preheating for sections >6 mm from 150 till 300 ºC is recommended. Use the normal …

… for welding S690 steels are usually under supervision of DNV , Lloyds , Bureau Veritas  and ABS because they have created a set of …

… shaving process and cleaning method during production.  Thicker sections should be preheated (150°C) prior to welding. … Filler metal …

… range of aluminum alloys and covers a weight range of alloys. Thicker sections should be preheated (150°C) prior to welding. … Aluminium …

… welds. Not recommended for anodizing. Non-heat treatable. Thicker sections should be preheated (150°C) prior to welding. … AlMgSi 0, …

… at sustained elevated temperatures. Non-heat treatable. Thicker sections should be preheated (150°C) prior to welding. … G-AlSi10Mg, …

… FL 155 and FL 851 depending on the requirements and application. Approvals in combination with FL 188 … A, B, D, E, St 37 - St 52-3, DIN …

… Complete with guides for all current AWS and EN ISO standards, this catalog is the ideal companion for you. … The welding Encyclopedia …