… Mo content, with low carbon content (less than 0.05%), to be used for welding creep resistant steels. … For 2.5%Cr-1%Mo-alloyed, …

… Solid welding wire of the 12% Cr, 4.5% Ni, 0.5% Mo type. … 1.4317, 1.4313, …

… FL 8111 is a fluoride basic agglomerated flux for stainless steel SAW welding. Basicity: about 2,6 (according to Boniszewski) Current: DC or AC, in single or multi-wires. Grain size: 2-28 … Submerged arc welding with stainless steel wires, AISI 410, 410NiMo, 308L, 316L, 2209 …

… and low temperature fine-grained structural steels. Exelent welding properties in short and spray arc. Excelent gab bridging for …

… Attractive bead appearance without slag residues. Best to be used with welding flux FL 915 … 1.4317, 1.4313, 1.4407, 1.4414,    GX4CrNi13-4, …

… wire, guarantees optimum metallurgical  quality, economic positional welding and attractive welder appeal.Very good resistance against …

… Hardfacing layers should be removed, clean or grind properly before welding. … Gear parts, recycling wear blocks, cutters, molds, pumps, …

… tungsten tool tips. Very good weld deposit appearance and outstanding welding properties on both AC and DC+. Preheating is not required. … …

… Extreme easy to weld with excellent welding properties. High world wide excepted quality with controlled …

… ferrite level between 30 and 50 (FN). Excellent for use in down hand welding. Excellent against pitting and stress corrosion. The PREN above …