… 10 ppm) for temper embrittlement resistant applications. Recommended flux: FL 155 … 2,25% Cr, 1% Mo  1.7015, 1.7131, 1.7147, 1.7380, 1.7337, …

… of taking a high polish. Structure: Austenite with delta ferrite. This fluxcored wire offers higher productivity, higher deposition rate and …

… FL 830 ESH has an excellent slag removal. Flux has a low hydrogen potential which makes it suitable for overlay …

… and other high temperature corrosion forms Welding similar alloys that have to resist extreme high temperature and for cladding …

… layers can be applied to obtain full hardness at the final layer. Flux to be used FL 830 ESH … 52-58 HRc electro slag and / or submerged … parts etc.. For ESW welding FL 830 ESHC should be used as welding flux to obtain the results mentioned in this datasheet. … SAS 550-VW … …

… similar to cast bronzes. Surfacing and joining of Copper and CuSn-Alloys. Widely used and recommended for oven soldering. High quality … similar to cast bronzes. Surfacing and joining of Copper and CuSn-alloys. Widely used and recommended for oven soldering. Mat.n: 2.1016, …

… on DC +. Stainless steel alloy for joining and cladding 17% Chromium alloys and cladding components where heat and corrosion resistance …

… its high elongation. We recommend CEWELD FL 880 or FL 838 as welding flux … 19%Cr,  9%Ni Type, ISO 15608: 8.1 < 19%Cr, 1.4316 1.4306, …

… against pitting and crevice corrosion, dissimilar joint of nickel alloys and stainless steels, … NiCrMo-4 2.4819, 1.7752, 2 NiMo16Cr15W … B574, SB574, B575, SB575, B622  UNS N10276,  Hasteloy C276, NiCrMo alloys, Inconel Alloy C276, Nicrofer 5716MoW … AA C-276 … A 5.34: E …

… Special alloy for welding aluminium-magnesium based alloys with maximum 5% Mg. Zirconium added as grain refiner to improve both the bending and corrosion resistance. … Aluminium alloys: AlMg4,5Mn, AlZnMgCu1,5, AlMg5, AlMg3, AlMg5, AlMg2Mn0.8, …