… abrasion resistance can be kept also with increased temperatures. For Hardfacing of more than 3 layers it is recommended to buffer with an … resistant coating even in extreme humidity conditions! … Tubular Hardfacing alloy for Sugar Mill knives and Hammers, Clinker Crushers, …

… to offer greater resistance to stress corrosion in the nuclear industry, pure water environment. Similar to FM 52 but the 52M is for …

… on the base metal and not always necessary. If applied correctly the hardfacing layer wil not show any cracks. … 55-60 HRc hardfacing alloy against shocks and mineral wear, Cement rollers and crushers, Drilling shafts, Mineral and brick crushing industry, Screw conveyers, waste recycling etc. … OA 56 Nb … 14700: T …

… Solid welding wire for Hardfacing parts that are subject to high abrasion, the addition of …

… parts subject to heavy impact and shock. In critical cases such as cement rollers the interpass temperature should be kept at 270ºC for … Weldable without protective gas. (Also weldable with M21 mixed gas) … Hardfacing alloy against heavy impact and shock for hammers, crushers, …

… of sensitive base material preheating is recommended at 300-400°C. Old Hardfacing layers should be removed, clean or grind properly before …

… 2400 HV Iron and Tungsten based hardfacing alloy containing 52-58% (depending on wire … Also for augers, impellers, mixer plates in the brick and clay industry and on decanter screws or hardfacing deep drilling equipment. … OA WC2 Fe … 14700: T Fe20 …

… alloy for the assembly and cladding of 17% chromium alloys and age Hardfacing components where heat and corrosion resistance similar to …

… Hardfacing alloy for cladding steel mill rollers, thermoshock resistant …

… is also used alloy is also used in the chemical and petrochemical industry. The low proportion of accompanying elements (Sn, As, Sb, P) …