… Special alloyed copper wire for Mig welding. The weld metal is a Cu-Al bronze. Sound, pore free deposits. … …

… FL 8111 is a fluoride basic agglomerated flux for stainless steel SAW welding. Basicity: about 2,6 (according to Boniszewski) Current: DC or AC, in single or multi-wires. Grain size: 2-28 … Submerged arc welding with stainless steel wires, AISI 410, 410NiMo, 308L, 316L, 2209 …

… deposits are air-hardenable that can normally be heat-treated after welding. … 1.4000, 1.4001, 1.4002, 1.4003, 1.4006, 1.4008,  1.4021, …

… Solid drawn ,corrosion-resistant, chromium-nickel wire for welding heat-resistant austenitic steels of the 25% Cr, 20% Ni …

… excellent wetting. Due to the excellent wetting and low melting point welding speeds can be achieved upto 2 mtr/min. The weld deposit offers …

… S460), approved according to grade 5Y46 at Lloyds and DNV. Excellent welding properties and extreme low hydrogen content below HD 3 ml/100gr …

… Hardfacing layers should be removed, clean or grind properly before welding. … Car recycling, cutters, pumps, stone crushers, knives, …

… range of alloys. Thicker sections should be preheated (150°C) prior to welding. … Aluminium alloys: AlMg4,5Mn, AlMg5, AlMg2Mn0,8, AlZnMg1, …

… tungsten tool tips. Very good weld deposit appearance and outstanding welding properties on both AC and DC+. Preheating is not required. … …

… of layers is 2 till 3 but when using a special stringer build up technick with release cracks, upto 15 layers is possible. … Nihard IV …