… The corrosion resistant deposit with a medium hardness is resistant against impact wear as well as permanent stress …

… and Powder HVOF DUR 1 (45/15). It contains a higher fraction of hard, brittle carbides than Powder HVOF DUR 6 (45/15), and has … pump vanes, bearing bushes and narrowneck glass mold plungers. Hardfacing of engine valves, pinch rollers in the metal-processing …

… and corrosion at high working temperatures upto 900°C. Crack free hard facing deposit against severe thermal shock and impact. To be used …

… Easy to use brass alloy for brazing without separate flux, (flux cored rod) good …

… abrasion combined with impact. The deposit gives already a very good hardness in the second layer thanks to the Titanium carbides. The … is depending on the base metal and not always necessary.  … HRc 54-59, hardfacing alloy for Cement crusher rollers, Mineral and brick …

… from the cryogenic region to over 980ºC. The weld deposit can be age hardened for greater strength at temperatures to about 700ºC. … Joining …

… as by C.-Cr. Carbide deposits. The deposit gives a extreme high hardness, all spray metal requires no buffer layer except on materials …

… After brazing flux residues can easily be removed mechanically or with a caustic soda solution. … Flux for silver brazing with a melting range from 450 till 800 °C, for Copper, Brass, …

… approx. 130% efficiency. The electrode is characterized by its tough hard and at the same time wear resistant deposition which offers high …

… to type 304, high mechanical properties and good weldability, work hardening and cold-tough to -196°C. … 19% Cr / 9% Ni / 7% Mn, ISO …