… solid wire for the GMAW/GTAW of low-temperature, fine-grained steels suitable for NACE requirements. The deposit provides good impact …

… Ductile welding deposit with high conductivity and corrosion resistance. The … than 5 mm should be preheated up to approximately 500 °C. … Cladding steel, Grey cast iron, Copper, Copper Alloys and dissimilar welding.  Mat.n: 2.0040, 2.0060, 2.0070, 2.0076, 2.0080, 2.0090, 20100, …

… on wire diameter) tungsten carbides. OA WC2-Fe  has good welding characteristics. Multi-layer deposits are not recommended due …

… years of testing new hardfacing compositions brought a new and special welding wire for Nihard with exceptional live. After 1547 Hrs. and …

… Austenitic filler metal for stabilized and non-stabilized CrNi steels. Heat resistant up to 350°C. Excelent toughness properties down …

… range of alloys. Thicker sections should be preheated (150°C) prior to welding. … Aluminium alloys: AlMg4,5Mn, AlMg5, AlMg2Mn0,8, AlZnMg1, …

… highest impact and pressure loads applications. Best to be used with welding flux FL 915 … Rebuilding rails, crossings, crushing hammers, …

… treatable. Thicker sections should be preheated (150°C) prior to welding. … G-AlSi10Mg, G-AlSi11 G-AlSi12 (Cu), G-AlSi7Mg, G-AlSi6Cu4 , …

… and weldability, better wetting properties compared to solid wires characterise CEWELD AA 316LP. Faster solidifying rutile slag with …

… resistant alloy with very good deformability properties and excellent welding caracteristics. Weldable under Co2 and Mixed gas. … Reh ≤ 620 …