1. … with niobium and titanium gives it the advantages of both these ferritic structure stabilizers: Titanium minimizes grain growth in Weld Metal zones (WM) due to titanium nitride (TiN) precipitation in the still liquid metal in these zones, thus avoiding …
  2. … Excellent weldabillity and good mechanical strength combined with good … alloys and covers a huge range of alloys. Thicker sections should be preheated (150°C) prior to welding. … Aluminium alloys: AlMg4,5Mn, … 3.3211, 3.4335, EN AW 5086, EN AW 5083, EN AW 5019, EN AW 5019, EN AW 6060, EN AW 6005A, EN AW 6082, EN AW 6061, EN AW 7020, EN AC 51300, EN …
  3. … The weld metal of the CEWELD 35-45Nb can be used in a low-sulphur, carbon-enriching atmosphere up to 1175°C … resistance and good resistance to carburization and oxidation. No preheating or post heat treatment is necessary. Pay attention to low …
  4. … CEWELD® AlSi12 Tig was originally developed as a brazing alloy to take … point and narrow freezing range. In addition, it has a higher silicon content than AlSi5, which provides increased fluidity and reduced … elevated temperatures. Non-heat treatable. Thicker sections should be preheated (150°C) prior to welding. … G-AlSi10Mg, G-AlSi11 G-AlSi12 …
  5. Brand: ITW Elga - Hobart
    CEWELD Product: AA R500, AA R500SR
    … Megafil wires are seamless and therfore they offer a lower hyrogen content (≈2 ml/100gr) even after many years of storage. Due to less preheating required huge savings can be made and these type of wires offer better feeding properrties …
  6. … He is a copper coated, Ni-alloyed (2,4% Ni), solid wire for low temperature … of 470 Mpa. The wire provides excelent impact thoughness down to -60°C. … For cryogenic construction steels and Ni bearing low temperature steels. 11MnNi5-3, 13MnNi6-3, 15NiMn6, S275NL-S460NL, S275ML-S460ML, P275NL2-P460NL2, P355ML2-P460ML2 ASTM: A203 grade …
  7. … wire is the same. Some of them look very similar but below the surface there are many things that effects the quality, some wires have strength of more than 1500 MPa and some wires only have 600 MPa but why is this so important? During wire feeding through the … the contact Tip. This liner can be made from steel, but some welders prefer a Teflon liner and believe that this results in less friction. …
  8. … CEWELD E NiFe 60/40 K has a few benefits compare to other “FeNi” types … current, copper coated core wire and a powerful arc at very low amps. Preheating is normally done to slow down the cooling speed, in case you … EN-GJS-400-15, EN-GJS-400-18, EN-GJS-450-10, EN-GJS-500-7, EN-GJS-600-3, EN-GJS-700-2. GGG40, GGG45, GGG50, GGG60; GGG70, GGG80 … E NiFe …
  9. … Alloy 740H Tig is a nickel-base, precipitation hardenable superalloy that offers a unique combination of high strength and creep resistance at elevated …
  10. … NiCrMo 686 (UNS N06686/W.Nr. 2.4606) is a single-phase, austenitic … to enhance properties. Low carbon (C) helps minimize grain boundary precipitation to maintain corrosion-resistance in the heat-affected … and super-austenitic stainless steels, nickel alloys such as UNS N06059 and N06022, INCONEL alloy C-276, and INCONEL alloys 622, C22, 625, …