… Outstanding alloy against high impact combined with abrasion including metal to metal friction. The weld … appearance and outstanding welding properties on both AC and DC+. Preheating is not required. … Rebuilding worn machine parts, Rails, …

… Mechanical properties listed below reflect utilization of a post-weld … between 1024°C (1875°F) and 1052°C (1925°F) for one hour, followed by precipitation hardening between 623°C (1135°F) … Suitable for precipitation hardening stainless steel used for welding materials of …

… NiCrMo 686 (UNS N06686/W.Nr. 2.4606) is a single-phase, austenitic … to enhance properties. Low carbon (C) helps minimize grain boundary precipitation to maintain corrosion-resistance in the heat-affected … and super-austenitic stainless steels, nickel alloys such as UNS N06059 and N06022, INCONEL alloy C-276, and INCONEL alloys 622, C22, 625, …

… CEWELD AquaForce MG offers a high deposition rate with remarkable … exceeding 500 MPa in sweet and salt water makes AquaForce MG the preferred choice by professional divers. … Reh ≤420 MPa (60 ksi) ISO 15608: 1.1, 1.2 1.0035, 1.0570, 1.0461,1.0562, …

… Very good abrasion resistance in combination with impact even at higher temperatures up to 550ºC. To much layers should be avoided, preheat is necessary to avoid cracking. A buffer layer with AA M690 or …

… This Type is identical to ER80S-B2, with the exception of the reduced carbon content. This results in lower hardness … of up to 550°C. Typical applications are in power plant construction, pressure pipe, turbine and boiler construction. The alloy is also used …

… The CEWELD 86104-CoCr-45 HVOF-sprayed, very dense coatings can be achieved … μm FSSS Apparent density (ISO 3923-2) 5.2-5.8 g/cm³ Particle shape: preponderantly spherical Coating microhardness: 800-1300 HV0.3 Sales … 3.3): -45+22 μm (*other sizes on request) -38+15 μm -25+10 μm … Compressor shafts, pump seals, flap actuators, paper rolls, ball valves, …

… Outstanding alloy against high impact combined with abrasion including metal to metal friction. The weld … appearance and outstanding welding properties on both AC and DC+. Preheating is not required. … Rebuilding worn machine parts, Stone …

… Submerged arc welding wire for welding fine grain steels for low temperature requirements down to -60°C in apparatus, construction and offshore applications. …   … 19Mn5 St 35.8, St 45.8 StE 210.7 TM, StE 480.7 TM StE 255 to StE 460 X 42, X65, X 70 EN same S185 - S355-S460 P235GH, P355GH P235T1/T2, …

… CEWELD 430 Ti is a 18%Cr alloy stabilized with Ti. This alloy has improved oxidation and corrosion resistance over an ER409 alloy. Single pass welds on light gage base metal or welds with preheat do not usually require PWHT. … 1.4000, 1.4002, 1.4016, 1.4057, …