1. … This pure aluminum filler metal offers excellent weldability when properly cleaned prior to welding. Heavy parts and thicker plates should be preheated (150°C), prior to welding  … Cast aluminium special repairs, …
  2. … Due to the high resistance to cracking and toughness, all weld metal requires no buffer layer. Suited for wear parts subject to heavy pressure, impact and shock. The interpass temperature should be maximum …
  3. … Ductile welding deposit with high conductivity and corrosion resistance. … as most commercial copper grades. Thicker sections than 5 mm should be preheated up to approximately 500 °C. … Cladding steel, Grey cast iron, … Copper, Copper Alloys and dissimilar welding.  Mat.n: 2.0040, 2.0060, 2.0070, 2.0076, 2.0080, 2.0090, 20100, 2.0110, 2.0150, 2.0170  UNS: …
  4. … Special flux cored self shielded stainless steel wire for open arc weldingThe weld beads produced have a self-releasing slag covering … that leaves a clean surfaceSound deposits are obtained even in the presence of cross draughtsPrimary choice for cladding and rebuilding …
  5. … The presence of tin improves the fluidity and is useful to increase the activity of the flux. Do not use this alloy above working temperatures …
  6. … Excellent welding properties with low spatter formation and very stable arc. Suitable for welding in all positions except vertical down. … recovery type for economic production of creep resistant steels and pressure-hydrogen-resistant 2¼Cr1Mo-steels. … 2,25% Cr, 1% Mo  1.7015, …
  7. … Moisture is still the main enemy for welding consumables. The minerals being used to form the slag that covers the weld pool are highly hygroscopic and should be taken very … hydrogen in 100gr weld metal is exceeded. The most important steps to prevent hydrogen induced cracking are: 1)  Use airtight packing for …
  8. … Can be welded crack free by preheating approxiamately 450°C and keep … for example in an oven. … 56-59 HRc hardfacing alloy, Mixing peddles, Press screws, Kneading machine, screw conveyors, pumps etc. … OA 54 L … …
  9. … This Type is identical to ER80S-B2, with the exception of the reduced carbon content. This results in lower hardness … of up to 550°C. Typical applications are in power plant construction, pressure pipe, turbine and boiler construction. The alloy is also used …
  10. … Excellent welding properties with easily controllable flow permits spatter free welding with very low current. … in case off multi-layer welding. The weld metal will show no undercut !Preheating is normally done to slow down the cooling speed, in case you …