… to type 304, high mechanical properties and good weldability, work hardening and cold-tough to -196°C. … 19% Cr / 9% Ni / 7% Mn, ISO …

… from the cryogenic region to over 980ºC. The weld deposit can be age hardened for greater strength at temperatures to about 700ºC. … Joining …

… as by C-Cr-B. Carbide deposits. The deposit gives a extreme high hardness, all spray metal requires no buffer layer except … tubular wire for metal spray on a C-Cr-B- carbide basis for extreme hard and heat resistant deposits on parts subject to severe mineral …

… After brazing flux residues can easily be removed mechanically or with a caustic soda solution. … Flux for silver brazing with a melting range from 450 till 800 °C, for Copper, Brass, …

… the exception of the reduced carbon content. This results in lower hardness and strength values, which reduces the tendency to crack, …

… Surfacing and joining of Copper and CuSn-Alloys. Widely used in oven soldering. High quality alloyed copper wire. Sound, pore free deposits … Surfacing and joining of Copper and CuSn-alloys. Widely used in oven soldering. Mat.n: 2.1010, 2.1016, 2.1020, 2.1030, 2.1050, 2.1052, …

… buffer layer except on materials considered critical or in case of old hardfacing layers. In this Situation OA 4370, ER 100 S1 or OA MnCr is … without gas (open arc). (Also weldable under M21 mixed gas) … 54 HRc hardfacing alloy for wear resistant overlays, sand pumps, valve seats, …

… Universal brazing alloy containing phosphor for use without additional flux on …

… good toughness and strength properties. The weld metal also work hardens. … ISO 15608: 11 (0,25 % < C ≤ 0,85 %)  Type: 29% Cr, 9%Ni  … 25CrMo4, 42CrMo4, 50CrMo4, 1.5223, 1.7218, 1.7225, 1.7228, Armox, Hardox … 312 … A 5.9: ER312 … 14343-A: G 29 9 …

… Alloy 740H Tig is a nickel-base, precipitation hardenable superalloy that offers a unique combination of high strength …