1. … 11018-G that delivers a welding deposit of less hardness. Overlays on steel with high carbon content should be buffered with CroNi 29/9 HL or …
  2. … content. Well suited for the economic joining of fine grain structural steels with yield strength of Rp0,2 550 MPa (80 ksi). As welding flux … classification S A FB 1 55 AC H5. … Materials: fine grain structural steels High grade structural steels - - - pipe steels steels to API-standard EN S315(NL1/2) - …
  3. … FL 838 is an agglomerated flux for SAW welding stainless steels and Nickel based alloys: AISI 308L, 347, 316L, 309L and 309LN. … FL 838 can be used for a weight range of wire types such as: stainless steel, and nickel based wires ranging from :308L, 316L, 347, 317L, Duplex 2209, Super Duplex 2507 and 2594, 1.4410,  9% Nickel steels and practically all other simmilar grades. … FL 838 … 14174: SA …
  4. … very fine particles that results in excellent wear resistance against heavy abrasion. Usualy the maximum number of layers is 2 till 3 but …
  5. … It has cavitation-erosion resistance ten times that of 304 stainless steel, DUR12 can be used to protect bearing surfaces in non-lubricating …
  6. … FL 155. Developed for welding cold tough, high tensile fine grain steel exceeding a yield strength of 890N/mm2. To obtain the requested … be adjusted by travel speed and preheat temperature. … S890 TM-pipe steels to StE 890 to S890QL1, A 517, X 120 high-strength fine grain structural steels (low temp) to StE 960 (StE 1100 to 12 mm) to S960QL1 (S1100 to …
  7. … requirements for sub zero temperatures down to -60°C.  Suitable for steel types up to 550 MPa yield strength, excellent welding properties …
  8. … properties under pure Argon suitable for high strength fine grain steels in combination with excellent impact toughness at sub zero … 1.8914, 1.8927, 1.8931, 1.8928, 1.7147, 1.7149, 1.8734 S620Q, S620QL, S690Q, S690QL, S620QL1-S690QL1, 20MnCr65, 28CrMn4-3 L480 - L550, X65, X80, …
  9. … carbon weld metal of about 23%Cr-13%Ni-2.3%Mo. Cladding on low alloyed steels,the weld metal already achieves approximately the composition of …
  10. … spatter loss, easy slag removal. Suitable for economic welding of Mo-steels up to 500°C (932°F). … Typ 0,5Mo  ≤ 460 MPa,  ISO 15608: 1.2, …