… also SAW … 39 … Exaton 18.8.Mn …

… production.  Thicker sections should be preheated (150°C) prior to welding. … Filler metal for welding Aluminium alloys with maximum 4% Nickel … Al 4Ni0,2Ti Tig …

… with good penetration and porosity free deposit, Unique self lifting slag and improved coating against moisture pick up.  … Al 4047A …

… Böhler welding … 53 … SOUDOKAY Record EST 426 …

… For welding heat-resistant austenitic steels of the 25% Cr, 20% Ni types. …

… CEWELD E Alloy 22H is characterized by a quiet and stable arc. Good slag removability and fine flaky seam pattern. The weld metal is …

… and promotes a ferritic micro-structure For the best results, welding must be done in a low heat input procedure and is not …

… at extreme currents and offers a Low hydrogen weld deposit. Excellent slag removal and protective gas is not required. High impact strength …

… High C-, Cr- alloyed flux-cored wire electrode which forms extremely hard carbides for extremely hard …

… requirements at sub zero temperatures down to -60 °C. Excellent welding properties. Yield strength > 550 MPa. Low hydrogen content HD < …