1. … properties are required. It is not recommended to use this alloy for welding aluminium alloys with a high magnesium content. Low melting …
  2. … particularly where thick coatings are needed. Using the combustion wire spray process, SP 1.4370 coatings can be sprayed thicker than SP … 1.4316 coatings, but not as thick as SP 420-B coatings. … Metals spray wire with good corrosion resistance and low shrink factor, recommended …
  3. … 900°C and excellent strength at high working temperatures. Excellent weldability and often used as economical alternative for „stellite“ … …
  4. … Mn and Sn. this type is the so cold “low fuming bronze”  Flux/Paste: CEWELD Universal-Flux … Brass, Copper, Steels, Manganese Bronze, Cast …
  5. … CEWELD SA 308L has good general corrosion resistance. The alloy has a low …
  6. … CEWELD® 308L Tig has good general corrosion resistance. The alloy has a …
  7. … Remarkable crack resistant weld metal in combination with very low ( …
  8. … against severe thermal shock and impact. To be used with fused flux CEWELD® FL 880. … Cladding seats and valves in chemical industry, hot …
  9. … alloy between 308H and 316H, operates in temperatures up to 800 °C. CEWELD® 16.8.2 Tig gives a very high resistance to thermal embrittlement. …
  10. … layer is recommended in case of sensible base material or old layers. Weldable without protective gas.Corresponding electrode: Dur 62 S … …