1. … feather. The deposit is not mashinable or forgeable. Only grinding with diamond tools is possible.Dur R (Ni) is available as a 500 mm … cast iron or Mn-steel. The main applications are hardfacing and rebuilding of stabilisers and other oilfield tools where maximum protection …
  2. … Attractive bead appearance without slag residues. Suitable for cladding and joining components against corrosion, high-heat and wear … FL 880.  … Cap layers for joining refractory Cr-Al-Si steels., cladding corrosion resistant overlays., Cladding heat resistant overlays (1100ºC), Cladding components in a …
  3. … crack resistant alloy with high mechanical properties and excellent welding characteristics. High Impact strength at sub zero temperatures … structural, oil and gas and offshore steelwork. … Reh ≤ 960 MPa ISO 15608: ~3.1, 3.2 (Reh > 690 MPa) 1.8796, 1. 8925, 1.8940, 1.8983, …
  4. … bead appearance without slag residues. Best to be used with welding flux FL 915 … 1.4317, 1.4313, 1.4407, 1.4414,    GX4CrNi13-4, …
  5. … a slightly higher percentage of phosphor, suitable for TIG welding, easy to handle, high plasticity of the weld metal. High quality … high electrical conductivity. Excellent corrosion resistance … Rebuilding and reconditioning electrical contacts. … CuAg Tig … A 5.7: ERCu … …
  6. … production.  Thicker sections should be preheated (150°C) prior to welding. … Filler metal for welding Aluminium alloys with maximum 4% Nickel … Al 4Ni0,2Ti Tig …
  7. … industry such as riser pipes that often are heat treated after weding.. … P460NL1, P460ML1, S460Q-S550Q, S460QL-S550QL, P460Q-P500Q, …
  8. … Excellent welding properties with high build-up capacity and low dilution rate. … medias. Excellent fatigue strength and creep properties. … Cladding against high temperature, radiant heater tubes, furnace rolls, …
  9. … SG CrMnMo EN 4332: FE-WL1805 (8CrMnMo12-4-9) wire is used for welding matching, and similar, composition base materials. … 30CrMoV12, …
  10. … mechanical properties within a wide range of heat inputs. Usable under AWS D1.8 for use on Demand Critical welds. … Rebuilding and joining steel parts that requires good strenght and high …