… optimum deposit rate and metallurgical quality and attractive welder appeal in the PA-PB position. Very good resistance against pitting …

… A continuous, solid, corrosion-resistant, duplex wire for welding austenitic-ferritic stainless alloys of the 22% Cr, 5% Ni, 3% Mo types. …

… Austenitic deposit with strain hardening properties and no limmits in …

… where improved corrosion resistance in specific media is needed. In order to reduce the propensity for fissuring and hot cracking, the low …

… (212 °F) and 150°C (302 °F) . As welding flux FL 155 should be used because of its high basicity and low hydrogen content. … Reh < 890 Mpa Iso …

… abrasion. This alloy has no risk for cracks and can also be applied on austenitic manganese steels. The weld deposit is good machinable. Very …

… but was then adapted for application as a material for the steam headers to which the boiler tubes are connected. … Inconel alloy 740H … …

… Preheating and interpass temperature 400-450 °C (austenitic welding) or 250-300 °C (martensitic welding). Root passes …

… CEWELD® L-Ag49niMn is a very good flowing, low-melting silver hard solder for operating temperatures from -200 °C to Max. 200 °C (without …

… Fully austenitic weld metal with high resistance against stress corrosion …