… Excellent weldabillity in combination with FL 860 ESHC with high welding speed and deposition rate. The weld seam shows a fine rippled …

… A continuous, solid, corrosion-resistant, duplex wire for welding austenitic-ferritic stainless alloys of the 22% Cr, 5% Ni, 3% …

… tungsten tool tips. Very good weld deposit appearance and outstanding welding properties on both AC and DC+. Preheating is not required. … …

… Extreme easy to weld with excellent welding properties. High world wide excepted quality with controlled …

… A high basic electrode for welding austenitic-ferritic stainless alloys of the 22% Cr, 5% Ni, 3% …

… FL 8111 is a fluoride basic agglomerated flux for stainless steel SAW welding. Basicity: about 2,6 (according to Boniszewski) Current: DC or AC, in single or multi-wires. Grain size: 2-28 … Submerged arc welding with stainless steel wires, AISI 410, 410NiMo, 308L, 316L, 2209 …

… properties are required. It is not recommended to use this alloy for welding aluminium alloys with a high magnesium content. Low melting …

… treatable. Thicker sections should be preheated (150°C) prior to welding. … G-AlSi10Mg, G-AlSi11 G-AlSi12 (Cu), G-AlSi7Mg, G-AlSi6Cu4 , …

… treatable. Thicker sections should be preheated (150°C) prior to welding. … AlMgSi 0, AlSiMg (A), AlSi 1 MgMn, AlMg1SiCu, 3.3206, …

… Excellent welding properties with high build-up capacity and low dilution rate. …