… sensitive base material preheating is recommended at 300 - 400 °C. Old Hardfacing layers should be removed, clean or grind properly before …

… 2400 HV nickel based corrosion resistant hardfacing alloy containing 60% tunsten carbides. OA WC2 (Ni)  has … Also for augers, impellers, mixer plates in the brick and clay industry and on decanter screws or hardfacing deep drilling equipment. … OA WC2 Ni … 14700: T Ni20 …

… is also used alloy is also used in the chemical and petrochemical industry. The low proportion of accompanying elements (Sn, As, Sb, P) …

… penetration this alloy is used mainly in construction and automotive industry. The silicon addition results in improved fluidity (wetting …

… steels in applications such as vessels, pipes and in the offshore industry with a minimum yield strength of 470 Mpa. The wire provides …

… to 550°C. as for similarly alloyed steels, quenched and tempered for cementation and nitrating. … Typ 1Cr 0,5Mo, ISO 15608: ~5,1 1.7335, …

… down to -50°C and is especially suitable for use in the offshore industry such as riser pipes that often are heat treated after weding.. …

… Excellent corrosion resistance as needed in chemical industry up to 400 °C and exceptional weldability with no spatter and …

… CrNiMo steels.Excellent corrosion resistance as needed in chemical industry up to 400°C and good weldability with excellent flowing …

… of ships, off-shore, storage tanks, railways and automotive industry. … Aluminium alloys: AlMg4,5Mn, AlZnMgCu1,5, AlMg5, AlMg3, …