… rutile slag with which X-ray weld seams are reliably achieved both under CO2 and mixed gas … ISO 15608: 8.1  Austenit ≤ 19 % Cr , TÜV 1000: …

… optimum deposit rate and metallurgical quality and attractive welder appeal in the PA-PB position. Very good resistance against pitting …

… fluidity (wetting action), making the alloy the preferred choice of welders. The alloy is not sensitive to weld cracking and produces bright, …

… therefore sensitive to hot cracking. The temperature limits for use under intermittent oxidation depend on cycle frequency. In no case shall …

… used on wear pads, rotary seal rings, pump sleeves and centerless grinder work rests. Excellent gliding characteristics, … ER CoCr-C  / Co3 …

… DC. The carbon content of the base metal should not exceed 0,45 % in order to avoid lack of fusion.  … Scratchers, Mixers, Deep drilling, …

… responsible for its creep strength are kept above the minimum considered necessary to ensure satisfactory performance. In this case, …

… all spray metal requires no buffer layer except on materials considered critical. In this  Situation …

… and joining of Copper and CuSn-Alloys. Widely used in oven soldering. High quality alloyed copper wire. Sound, pore free deposits and … and joining of Copper and CuSn-alloys. Widely used in oven soldering. Mat.n: 2.1010, 2.1016, 2.1020, 2.1030, 2.1050, 2.1052, 2.1056, …

… über unsere Tagungseinrichtungen und B2B-Veranstaltungen oder Beratung wenden Sie sich bitte an: Patrick Bovendeerd Tel: +31 (06) …