- … optimum deposit rate and metallurgical quality and attractive welder appeal in the PA-PB position. Very good resistance against pitting …
- … rutile slag with which X-ray weld seams are reliably achieved both under CO2 and mixed gas … ISO 15608: 8.1 Austenit ≤ 19 % Cr , TÜV 1000: …
- … fluidity (wetting action), making the alloy the preferred choice of welders. The alloy is not sensitive to weld cracking and produces bright, …
- … therefore sensitive to hot cracking. The temperature limits for use under intermittent oxidation depend on cycle frequency. In no case shall …
- … DC. The carbon content of the base metal should not exceed 0,45 % in order to avoid lack of fusion. … Scratchers, Mixers, Deep drilling, …
- … responsible for its creep strength are kept above the minimum considered necessary to ensure satisfactory performance. In this case, …
- … used on wear pads, rotary seal rings, pump sleeves and centerless grinder work rests. Excellent gliding characteristics, … ER CoCr-C / Co3 …
- … and joining of Copper and CuSn-Alloys. Widely used in oven soldering. High quality alloyed copper wire. Sound, pore free deposits and … and joining of Copper and CuSn-alloys. Widely used in oven soldering. Mat.n: 2.1010, 2.1016, 2.1020, 2.1030, 2.1050, 2.1052, 2.1056, …
- … über unsere Tagungseinrichtungen und B2B-Veranstaltungen oder Beratung wenden Sie sich bitte an: Patrick Bovendeerd Tel: +31 (06) …
- … quality guarantees optimum metallurgical quality and attractive welder appeal. Combined with our high basic electro slag flux FL 830 ESHC …