… excellent weldability when properly cleaned prior to welding. Heavy parts and thicker plates should be preheated (150°C), prior to …

… PbSn soft solders.  Excellent results are obtained on stainless steel with our "ST" flux. … Steel, stainless steel, brass, copper, galvanised steels, Sn plated steels etc. … …

… any risk for cracks and can also be applied on austenitic manganese steels, 300 HB is usually already almost obtained in the first layer. …

… CEWELD® 316H Tig is designed for welding 316/316H austenitic stainless steels operating at high temperatures (500-800°C) under long term creep …

… is non magnetic and can not be flame cut. Extreme resistance to heavy impact loads. The weld deposit offers fair corrosion resistance …

… High deposition rate and excellent weldability on DC +. Stainless steel alloy for joining and cladding 17% Chromium alloys and cladding … … 1.4122 (G)X35CrMo17, 1.4313, 1.4000, 1.4001, 1.4002, Cast steels   … 4115 HLS … A 5.4: ~E 430HMo-26 … 3581-A: ~E Z 17 1 B 42 …

… weld metal requires no buffer layer. Suited for wear parts subject to heavy impact and shock. The interpass temperature should be maximum … achieved in the first layer. … Rails repair, crossings, concrete bars, crane, railway and tram tracks, conveyors and transport surfaces, …

… rutile flux cored TIG filler rods for root pass welding of stainless steel pipe without the need for a reverse side back purge (internal …

… with good penetration and porosity free deposit, Unique self lifting slag and improved coating against moisture pick up.  … Al 4047A …

… content (less than 0.05%), to be used for welding creep resistant steels. … For 2.5%Cr-1%Mo-alloyed, heat-resistant, ferritic steels of the same type. 1.7380, 1.7379 10CrMo 9-10, G-17CrMo 9-10, …