… no limit for the number of layers that can be applied in case of rebuilding but heat input should be kept low (as for Mn steel). The weld … manganese steel, high impact loads, hammers, crushers, rebuilding, hardfacing, rails, crossings, Breaker teeth, etc.. … E DUR Mn14 … …

… metal has low levels of tramp elements (eg. Sn, As, Sb and P) providing a low Bruscato Factor.(X …

… by SA Nicro 600 has high strength and good corrosion resistance, including oxidation resistance and creep-rupture strength at elevated … Use FL 860 ESHC flux … SA Nicro 600 is mainly used for ESW and SAW cladding of carbon steel to obtain corrosion and creep resistant layers. Go …

… are required. It is not recommended to use this alloy for welding aluminium alloys with a high magnesium content. Low melting point: …

… and promotes a ferritic micro-structure For the best results, welding must be done in a low heat input procedure and is not recommended …

… of intergranular corrosion. The higher silicon content improves the welding properties such as wetting and results in a bright seam. … ISO 15608: 8.1  Austenit ≤ 19 % Cr , TÜV 1000: Gr. 21-30,  1.4583, …

… Excellent sliding properties. … Bronze metal spray wire for coatings that require good sliding properties. … SP CuSn6 … 14919: 4.4 …

… Extreme easy to weld with excellent welding properties and increased yield strenght. High world wide excepted … applications. Weldable with Co2 and Mix gas. … Re ≤460 MPa (67 ksi)  ISO 15608: 1.1, 1.2, 1.3, 2.1 S235JR-S355JR, S235JO-S355JO, S450JO, …

… resistance against seawater and general corrosion with excellent welding properties with self detaching slag.  … NF A 35-578 : Z 15 CN 24.13 ASTM/AISI : 304, 347, 309 DIN 17175 : X 12 CrNi 22.12. W.Nr: 1.4828, 1.4311, 1.4712, 1.4742. …

… Excellent gliding properties against metal to metal wear due to its low friction, … and can resist severe shock and impact at these temperatures. … Cladding seats and valves in extreme high temperaure engines, hot sharing …