… metal has low levels of tramp elements (eg. Sn, As, Sb and P) providing a low Bruscato Factor.(X …

… high speed basic flux for the SAW process. Basicity: about 2,2 (according to Boniszewski) Current: DC or AC, in single or multi-wires Grain size: 2-28 … Unalloyed steels: St 33 – St 52, Ship building: A, E, AH, EH, Boiler steels: HI-HIII, 17Mn4, 19Mn5, Pipe steels: …

… weld deposits (over-matching weld overlays, weld inlays, and claddings). -It is easier tot weld with ULTIMET wire than traditional …

… Solid drawn ,corrosion-resistant, chromium-nickel wire for welding heat-resistant austenitic steels of the 25% Cr, 20% Ni types. 310 … relatively severe thermic shock, and is superior to type 309 L. … ISO 15608: 8.1  Austenit ≤ 19 % Cr , TÜV 1000: Gr. 21-30,  Type: 25% …

… The  alloy deposit can be machined  with tungsten tool tips and by grinding. The hardness of the deposit will degrease 16% at 300°C and about …

… or toughness. Grade 5 is used in aircraft components such as landing gear, wing spars, and compressor blades. Its corrosion resistance …

… has a low hydrogen potential which makes it suitable for overlay welding of heat resistant steel like A387 types. … Cr, CrNi, CrNiMo …

… The CEWELD® 904L is used for welding materials of similar chemical composition which are used for …

… 400”. It has good strength and resists corrosion in many media, including sea water, salts and reducing acids. The weld metal is not age … NiCu30Fe, NiCu30Al, Monel 400, R405, Alloy K500 and dissimilar welding between these Alloys. … E NiCu30Mn … A 5.11: E NiCu-7 … 14172: E …

… heat resistance as well. The spray deposit is only machinable by grinding.  … High-alloyed tubular wire for metal spray on a C-Cr-B- carbide …