… Widely used in oven soldering. High quality alloyed copper wire. Sound, pore free deposits and good electrical conductivity. … resistance … Tin bronze alloy of minimally 6% tin for virtually all welding procedures. Very good deoxidisation. Surfacing and joining of …

… impact levels. Very good weld deposit appearance and outstanding welding properties on both AC and DC+. Preheating is not required. … …

… resistance to stress corrosion in the nuclear industry, pure water environment.. … Inconel 690, VDM Alloy 690, Nicrofer 6030 N, FM 52, …

… for exceptionally high bond strengthResists corrosion and alkaline environmentsExcellent bond coat Service up to 800 °C (1470 °F) Is an …

… SG NiMo1 is a 0.9% Ni-alloyed (ER80S-Ni1), copper-coated, solid wire for the GMAW/GTAW of low-temperature, fine-grained steels. The …

… UTP Böhler welding … 53 … SOUDOKAY Record EST 136 …

… deposits are air-hardenable that can normally be heat-treated after welding. … 1.4000, 1.4001, 1.4002, 1.4003, 1.4006, 1.4008,  1.4021, …

… range of alloys. Thicker sections should be preheated (150°C) prior to welding. … Aluminium alloys: AlMg3, AlMg4, AlMg5,AlMgSi0.5, AlMgSi1; …

… properties are required. It is not recommended to use this alloy for welding aluminium alloys with a high magnesium content. Low melting …

… Ductile welding deposit with high conductivity and corrosion resistance. The … should be preheated up to approximately 500 °C. … Cladding steel, Grey cast iron, Copper, Copper Alloys and dissimilar welding.  Mat.n: 2.0040, …